RESIN FLOORING CASE STUDY

Bodyshop Resin Flooring West Midlands

Location
West Midlands
Sector
Automotive
System
Resin High Build Coating
Floor area
570m²

Project Overview

Our client, a renowned UK bodyshop group, engaged JD Flooring Ltd for the fourth time, demonstrating their trust in our expertise, professionalism, and results. This project posed a unique set of challenges due to the age of the workshop and the diversity of its existing floor finishes. The project involved the removal of an area of quarry tiles, screeding to level up the surfaces, and comprehensive mechanical grinding to prepare the entire area.

Covering a space of 570 square meters, the workshop’s flooring had not been resurfaced in several years and had almost worn away completely. The area encompassed a spray booth, seven car lifts, and an inspection area, all requiring extensive floor restoration and enhancement.

Assessment and Recommendation

JD Flooring Ltd formulated a solution that would tackle the intricate requirements of this project. Following comprehensive preparation of the site, we identified numerous areas of impact damage, particularly in zones frequented by mechanics. To rectify these, repair mortars were used, and scratch coats were applied to ensure the substrate was as flat as possible, and any damage was duly repaired in readiness for the new coatings.

Understanding the workshop’s needs and the nature of its operations, we recognised that a thicker first coat than usual would be beneficial. This approach was designed to mask some of the outstanding imperfections within the substrate, to a reasonable extent.

Preparation and Repair

Using a squeegee method, the first, thicker-than-usual layer of high build epoxy resin scratch coating was applied, followed by a back roll technique over the total area.

Once this initial scratch coating was installed, we proceeded to fill some outstanding holes apparent in the surface, enhancing the overall structural integrity and aesthetic of the floor.

Installation Details

Upon the completion of the primary repairs and first coat, a final layer of high build epoxy coating was applied. This was supplemented with a light scatter of aggregate. The addition of the aggregate served a dual purpose – enhancing the aesthetic appeal of the floor and providing the necessary slip resistance for the safety of the mechanics and other personnel.

The Finished Floor

Client Feedback and Satisfaction

As part of our standard procedure at JD Flooring Ltd, we followed up with the client the next day. They expressed high satisfaction with both the end result and the service received. The upgraded flooring not only met their operational needs but also brought about a visible improvement in the workshop’s aesthetics.

This project reaffirms JD Flooring’s reputation for delivering tailored, high-quality resin flooring solutions, meeting diverse client needs, and consistently achieving high levels of customer satisfaction.

THE SYSTEM WE INSTALLED

Resin Flooring Type Used

Resin High Build Coating

A solvent free epoxy coating applied in two or more coats, building a film thickness of up to 1,000 microns. It is specified for medium duty use where the requirement is a clean, hard wearing surface over sound concrete.

Aggregate is scattered between coats where a slip resistant finish is needed. Anticipated life is 5 to 7 years in light use and 2 to 4 years under moderate use.

Resin High Build Coating characteristics
ApplicationApplied in two or more coats, solvent free
Intended UseMedium duty use
ThicknessUp to 1000 microns
ChemicalsSome resistance to chemical spillage
Slip ResistanceAggregate can be added to achieve a slip resistant finish
Anticipated LifeLight use 5-7 years / Moderate use 2-4 years
EXPLORE THE PORTFOLIO

More Case Studies Like This One

A prominent UK logistics company in Wolverhampton approached JD Flooring Limited to implement a comprehensive resin flooring demarcation system. As a valued client of over five years, they

WolverhamptonHigh Build Coating

A leading UK paint manufacturer approached JD Flooring Limited to undertake a challenging resin flooring installation project at their Manchester facility.The project involved renovating a 345m² paint storage

ManchesterHigh Build Coating

JD Flooring Limited, a specialist in resin flooring installation since 1999, recently completed a significant project for a leading supermarket distribution centre in Cheshire. The project involved refurbishing

CheshireHigh Build Coating

Our client approached us with a clear vision for upgrading their double garage floor. Their primary focus was on eliminating the persistent dust problem that had been plaguing

CheshireHigh Build Coating

In the demanding environment of a busy hotel kitchen, flooring plays a crucial role in maintaining safety, hygiene, and operational efficiency. When a leading hotel chain in Gateshead

GatesheadHeavy Duty Polyurethane Screed

As the approved contractor for a pharmaceutical company in Liverpool, JD Flooring Limited was tasked with installing a suitable flooring solution for a newly refurbished office space being

LiverpoolHigh Build Coating

As the approved contractor for a school district in Cheshire, JD Flooring Limited was tasked with addressing the deteriorating floor in the main hall of a Primary School.With

CheshireSelf Smoothing

As the approved contractor for a large UK furniture manufacturer, JD Flooring Limited recently undertook a significant industrial flooring project in Lancashire. This case study examines the comprehensive resin

LancashireHigh Build Coating

In the healthcare sector, maintaining a clean and hygienic environment is of utmost importance. This is especially critical in nursing homes, where vulnerable residents and dedicated staff depend on

Stoke-on-TrentHeavy Duty Polyurethane Screed

FREE SURVEY AND FIXED QUOTATION

Talk to Us About Your Floor

Tell us how the area is reached, what happens in it and how long it can be closed. We attend, test the substrate, and put a written specification and a fixed price in front of you at no cost.

Please enable JavaScript in your browser to complete this form.