JD Flooring Limited is a Cheshire-based specialist in industrial, commercial and residential resin flooring. We have been installing these floors since 1999, and the same standard of preparation, specification and documentation goes into a single garage as into a factory running three shifts. This page covers who we are, what we are accredited to do, how we work safely on a live site, and what clients say afterwards.
We are a specialist contractor rather than a general flooring company, and resin is the only thing we install. That focus is the reason the specification conversation starts with the substrate and the duty rather than with a product range, and it is why we will tell a client when the system they have asked for is more floor than their building needs.
The work is weighted towards refurbishment inside operating facilities, which shapes how we run a job: phased and zoned around production, sequenced into shutdown windows, and documented before mobilisation rather than after it. We work across the North West, North East Wales, Yorkshire and the Midlands, with coverage in over eighty towns.
Working for national manufacturers, logistics operators and public sector estates since 1999.
Most of what follows is requested at the approval stage rather than at the enquiry stage, so it is set out here in full.
All of it is available as documentation on request.
Every operative handling polyurethane products holds current REACH diisocyanate training, documented on completion and renewed on the five-year cycle.
Quality and environmental management certification, giving procurement teams the documented management systems their approval process asks for.
Method statements, COSHH assessments and risk documentation issued before mobilisation, rather than chased up once the work has already started.
The hazard most often underestimated on a flooring job is the preparation, not the resin. Mechanically grinding a concrete floor releases respirable crystalline silica, which falls under COSHH and the EH40 workplace exposure limits, where the limit is 0.1 mg/m³ as an eight-hour time-weighted average. Every installation we carry out uses industrial diamond grinding with HEPA-filtered vacuum extraction, so the dust is captured at source rather than swept up afterwards.
The second is the chemistry. Polyurethane products contain diisocyanates, and the operatives applying them hold current REACH training for exactly that reason. Beyond those two, working inside a running facility means segregation, signage and sequencing matter as much as the floor itself: method statements and COSHH assessments are issued before we mobilise, and the working area is agreed with the site team rather than assumed.
Environmental management certification is one thing; what happens on a site is another. Dust extraction keeps ground concrete out of the air and out of the drainage. Waste resin and packaging leave site through the correct route rather than into the client’s skip. Where we are working on containment — bunded areas and chemical storage under the Control of Pollution (Oil Storage) Regulations and the Environmental Permitting Regulations — the floor is part of the environmental control, and it is specified against the substances actually stored rather than a generic chemical resistance claim.
There is a lifecycle argument too, and it is the honest one. A floor specified correctly and prepared properly lasts years longer than one that was under-specified to win a price, which means fewer refurbishments, less material and less disruption over the life of the building.
Our clients are named nowhere on this site. Feedback is recorded by sector and role only, by agreement with the operators concerned, which is the condition on which most of them are willing to give it at all.
The plant manager reported that the installed floor met the standards the facility is audited against, and rated the team knowledgeable and attentive throughout.
The client described the finished floor as durable and hygienic as well as visually sound, and the installation as professional and efficient from start to finish.
The operator reported a floor resisting oil spills and heavy machinery, with the programme worked around their schedule to limit disruption to daily activity.
We attend site, test the substrate for moisture and contamination, and record the traffic, chemicals, temperatures and closure window the floor has to work around. You get a written specification naming the system, its FeRFA type, its thickness and the preparation method, before you commit to anything.
