RESIN FLOORING CASE STUDY

Pharmaceutical Resin Flooring Leicester

Location
Leicester
Sector
Pharmaceutical
System
Resin Floor Seal
Floor area
45m²

Project Overview

Our client is a globally renowned Pharmaceutical Company, setting the benchmark in the industry. They operate in a sector where precision, cleanliness, and compliance with stringent standards are vital.

The client’s facility, classified as a class 10,000 area and adhering to cGMP standards, faced a pressing challenge. An unfit drain and delaminating vinyl flooring were compromising the area’s integrity.

The effected area was approximately 45m2 and included a bespoke drainage system and coving. Understanding the pressing and critical nature of these issues, a rapid and effective response was essential.

Assessment and Recommendation

JD Flooring Ltd conducted a thorough assessment, noting the excessive staining and general corrosion of the existing vinyl surface. Given these conditions, and the relatively short time period that had elapsed for the degradation of the surface to reach a critical level, it was apparent that a more robust, chemical-resistant resin system was necessary. We recommended the affected area be completed stripped back, a new gully cut to house an improved drainage system and a 6mm heavy-duty polyurethane screed with 100mm high polyurethane coving system, adhering to cGMP standards.

As part of this installation, we commissioned our drainage specialist to fabricate and install a bespoke “T” shaped drain, laid to falls, with a new gully and trap.

Preparation and Repair

The initial step involved removing the existing vinyl and cap and cove system. Water ingress over time had eroded the latex underneath, facilitating the removal process. 

After clearing the failed system, the area was thoroughly cleaned. Limited access necessitated the use of small handheld grinders, fitted with PCD discs for heavy-duty grinding.

The subsequent phase included diamond cutting for the new drain and gully, followed by the removal of existing concrete to a depth of 200mm, readying the area for the new drainage installation.

Installation Details

After preparing the area, we primed the entire area and the newly created drainage void, installing a polyurethane bulk system to encase the new drain and gully. The drainage installations were secured in place overnight.

Over the course of the following two days, the team installed the 6mm heavy duty polyurethane screed adhering to cGMP standards.

The team also installed the 100mm high polyurethane coving system, which was secured to the walls with stainless steel trim for durability and to ensure cGMP standards compliance.

The Finished Floor

Client Feedback and Satisfaction

THE SYSTEM WE INSTALLED

Resin Flooring Type Used

EXPLORE THE PORTFOLIO

More Case Studies Like This One

The NHS Project posed a unique challenge: tight timelines set by the main contractor coupled with a demanding workload due to a faulty screed overlaying the concrete substrate.To

YorkshireHeavy Duty Flowable

As the project progressed, the magnitude of the challenge became evident. The building’s poor condition, largely due to the neglect of the former tenant, presented a series of

ReadingHigh Build Coating

With a longstanding reputation for offering the highest quality of service to their vast customer base, this prominent UK supermarket chain was determined to enhance a dedicated area.Their

CheshireHigh Build Coating

The project was essentially about fixing a job that had been poorly done by another contractor. Our initial site survey revealed that the previous contractor hadn’t prepared the

ManchesterHeavy Duty Flowable

Our client is a Timber Truss Manufacturer, based in Scotland who operates a timber mill, dating back to the 1920s. The site itself is 425m2 and has endured

ScotlandHigh Build Coating

Based in Birmingham, this UK distribution company is responsible for storing and distributing a diverse range of products, with a vast logistical network. They operate out of four

BirminghamHeavy Duty Polyurethane Screed

An international timber importer based in Grangemouth, Scotland, operates from a century-old building spanning 550m2. In the bustling world of manufacturing, every moment counts and for this client

ScotlandHigh Build Coating

Over the course of five years, JD Flooring Ltd has consistently provided exceptional flooring solutions to our client, a notable oil export company. In our most recent project, we

ScotlandHigh Build Coating

Our client, a renowned UK bodyshop group, engaged JD Flooring Ltd for the fourth time, demonstrating their trust in our expertise, professionalism, and results. This project posed a

West MidlandsHigh Build Coating

FREE SURVEY AND FIXED QUOTATION

Talk to Us About Your Floor

Tell us how the area is reached, what happens in it and how long it can be closed. We attend, test the substrate, and put a written specification and a fixed price in front of you at no cost.

Please enable JavaScript in your browser to complete this form.