RESIN FLOORING CASE STUDY

Food Warehouse Flooring East Yorkshire

Location
East Yorkshire
Sector
Food & Drink
System
Resin High Build Coating
Floor area
445m²

Project Overview

JD Flooring recently completed a comprehensive resin flooring installation project for an expanding food sector distribution centre in East Yorkshire. The project encompassed a substantial floor area of 445 square metres within a newly acquired warehouse and storage facility where racking systems were already in position, presenting unique installation challenges.

Drawing upon our 24 years of experience in industrial resin flooring installation, our team approached this project with careful consideration of the specific requirements of the food sector. The existing client’s expansion plans necessitated a robust flooring solution that would address existing surface cracks while providing a durable wearing surface suitable for their distribution operations.

Assessment and Recommendation

Initial inspection revealed that 90% of the substrate was structurally sound, though specific areas required targeted attention. The most significant challenge was identified at the building’s upper section, where the removal of an office space had created noticeable height differences in the floor level. This assessment highlighted the need for a systematic approach to surface preparation and levelling.

Based on these findings, our technical team specified a comprehensive treatment plan. This included a heavy-duty grinding process, followed by edge grinding around the existing racking systems. The specification called for a bulk mortar application to create a seamless transition between the former office substrate and the main floor area. The final system would comprise two coats of epoxy high-build coating, with the ultimate layer incorporating a light aggregate scatter to enhance slip resistance.

Preparation and Repair

The preparation phase began with the deployment of our triple-headed HTC heavy-duty grinder, ensuring thorough surface preparation across the main floor area. Our specialists followed this with meticulous hand-held grinding operations to properly prepare all building edges and racking feet, creating a uniform surface profile throughout the facility.

Once the grinding process exposed all structural details, our team identified and treated various cracks and day joints. We applied a flexible epoxy mortar to fill these voids, ensuring structural integrity and creating a sound foundation for the subsequent resin flooring installation. This careful attention to substrate preparation was crucial for achieving optimal adhesion and longevity of the final floor system.

Installation Details

The resin flooring installation commenced with the application of a dark grey, hard-wearing epoxy coating across the entire 445-square-metre area. Our experienced installation team employed a squeegee application method, followed by back-rolling to ensure uniform coverage and optimal material distribution. This initial coating was allowed to cure overnight under controlled conditions.

The following day, we applied a second coat of the same high-performance epoxy system, this time incorporating a 0.3mm – 0.6mm aggregate to enhance slip resistance. This final layer was installed using identical application techniques to maintain consistency in finish and performance characteristics, creating a seamless, durable surface throughout the facility.

The Finished Floor

Client Feedback and Satisfaction

The transformation of the distribution centre’s flooring system exceeded our client’s expectations, particularly in terms of functionality and aesthetic appeal. The new resin floor coating provided them with a safe, durable surface that perfectly aligned with their operational requirements while maintaining professional appearance standards essential for their food sector operations.

Our client specifically praised JD Flooring’s methodical approach to the project, highlighting our attention to detail and ability to deliver within the agreed timeframe. The successful completion of this resin flooring installation project further strengthens our portfolio in the food and distribution sector, demonstrating our capability to provide tailored flooring solutions that meet specific industry requirements.

THE SYSTEM WE INSTALLED

Resin Flooring Type Used

Resin High Build Coating

A solvent free epoxy coating applied in two or more coats, building a film thickness of up to 1,000 microns. It is specified for medium duty use where the requirement is a clean, hard wearing surface over sound concrete.

Aggregate is scattered between coats where a slip resistant finish is needed. Anticipated life is 5 to 7 years in light use and 2 to 4 years under moderate use.

Resin High Build Coating characteristics
ApplicationApplied in two or more coats, solvent free
Intended UseMedium duty use
ThicknessUp to 1000 microns
ChemicalsSome resistance to chemical spillage
Slip ResistanceAggregate can be added to achieve a slip resistant finish
Anticipated LifeLight use 5-7 years / Moderate use 2-4 years
EXPLORE THE PORTFOLIO

More Case Studies Like This One

As a trusted partner and the approved contractor for a large electrical and electronics manufacturer based in Stockport, JD Flooring recently completed a resin flooring demarcation project to

StockportHigh Build Coating

As a trusted partner and the approved contractor for this international distribution company based in the West Midlands, JD Flooring was tasked with the annual re-coating of the

West MidlandsHigh Build Coating

An engineering company based in Warrington recently relocated to new premises, requiring their 165m2 manufacturing floor space to be brought up to health and safety standards. The client

WarringtonHigh Build Coating

An renowned International Oil Export Company, located in the heart of the West Midlands, approached JD Flooring Ltd for a significant update on their resin screed flooring system. Five

West MidlandsHigh Build Coating

This project involved a prominent Cheese Producing Company, based in Wales, who are widely recognised for their quality products in the Food Sector.This client, was already familiar with

WalesHigh Build Coating

Returning to JD Flooring Ltd, the client, an avid collector of high-end sports cars, had constructed a new garage in rural Cheshire.

CheshireHigh Build Coating

Our client is a globally renowned Pharmaceutical Company, setting the benchmark in the industry. They operate in a sector where precision, cleanliness, and compliance with stringent standards are

LeicesterFloor Seal

A key player in the global market, this Leicester-based timber truss and components manufacturer faced a specific challenge within their facility.The project involved installing epoxy resin demarcation across

LeicesterHigh Build Coating

This project involved a prominent Cheese Producing Company, based in Wales, who are widely recognised for their quality products in the Food Sector.This client, was already familiar with

WalesHigh Build Coating

FREE SURVEY AND FIXED QUOTATION

Talk to Us About Your Floor

Tell us how the area is reached, what happens in it and how long it can be closed. We attend, test the substrate, and put a written specification and a fixed price in front of you at no cost.

Please enable JavaScript in your browser to complete this form.